Concrete crack repair
Drill Ø12mm holes, in staggered row, in each side of the concrete crack with a 45° angle to reach it in depth. Remove the dust with an air blown gun.
The anchoring sleeves are inserted in each drilled hole, using a hammer until a perfect fit. With a mounting tool, hammer strongly the injectionpacker into each anchoring sleeve.
The anchoring sleeve expands and firmly holds all together.
For vertical cracks, seal the crack in surface with a waterproof material to avoid the resin to come out.
Inject gradually the injection resin depending on the concrete condition. Only use officially approved chemicals and equipment; wear the Personal Protective Equipment required.
After injection, the injection-packer head can be immediately cut and holes must be resealed.
Concrete crack repair

High-Pressure Injector ø12 With head in 2 parts per 500

High-Pressure Mechanical Injection packer 10x100mm x100

High-Pressure Mechanical Injection packer 14x110mm x100

Injector 18mm pneumatic Grey per 1000

Injektor 12 mm mit Kopf L65 grau

Gel- und Ziment Injektor 18 mm ohne Kugel

Flat head packer Ø12 grey

Tube diffuseur ø12 L2 m non percé

Rod for Ø18 inj. L2m

Bouterolle pour injecteur avec tête pneumatique

pompe pour injection resineflexible 30cmagrafe Graisseur

MABI Airless diaphragm pump 4.5L

6L Tank for Diaphragm Pump

Airless hose 15m

Injection-Spraying gun
