Green surfactant, 25L can

Ready-to-use surfactant for the removal of asbestos-containing materials

Product description:

Surfactant is a fluid emulsion with a high concentration of synthetic polymers and nanoparticles, specifically formulated to temporarily encapsulate asbestos materials, in accordance with D.M. 20/08/1999 (Type D).

It penetrates deep into the substrate, binding free or releasable asbestos fibres and forming a visible, abrasion- and weather-resistant film.

Technical characteristics:

Physical state: milky liquid

Colour: red (or blue, green, other colours available)

Odour: characteristic

Solubility: miscible in water

Specific gravity: 1.00 kg/l ± 0.05

Dry residue (180°C): 10% ± 0.5

Viscosity: 200 ± 50 cP

Softening point: +80°C

Minimum film-forming temperature (T. M.F.): +5°C

Dry film thickness: approx. 20 µm per coat

Coverage: 1 L per 5 to 7 m² depending on the porosity of the substrate

Drying time: approx. 30 minutes

Packaging:

Jerrycan: 10 kg / 25 kg

EPAL: 750 - 1125 kg

Cans: 1000 kg

Application:

Methods: brush, roller or low-pressure spray

Application temperature: +5°C to +40°C

Tool cleaning: warm water immediately after use

Ready to use - Do not dilute

Shake before use

Advantages:

✅ Fast, effective encapsulation of asbestos-contaminated surfaces

✅ Strong adhesion to a variety of substrates (concrete, wood, metal, plastic...)

✅ High resistance to abrasion and weathering

✅ Very good visibility of the treated substrate

✅ Eco-compatible product - low VOC content (≤ 30 g/L)

✅ Can be used with non-professional pumps

Areas of use:

Removal of asbestos cement sheets 

Asbestos removal work in outdoor or confined environments

Preparation for the safe transport of asbestos waste

Compliance & safety:

Complies with D. M. 20/08/1999 - Type D

Safety Data Sheet (SDS) available

Non-hazardous product - complies with ISO 9001:2000 standards