Injector Ø6,5 without head brown L21

01010008

For small wood pieces: half-perimeter ≤ 17 cm

Bag of 1000 units.


Color
€28.50
Quantity


Diameter 6.5mm injectors are recommended for the injection of wood preservative chemical into small timber sections (with a half-perimeter less than 17 cm).

They prevent chemical backflow during the injection with their no-retun valve.

Use a 6.5mm drill bit.

With headless injectors, inject with a male injection nozzle.

After completing the wood treatment, you can hide the injectors with a cap (the caps allow reinjection) or a wooden plug.

Injectors with length 21MM are recommended for the rafters and length 15MM for the door and window frames.

Diameter 6.5 MM

Length 21MM

Headless connection type

Non-return system: Metal ball

Material: High density polyethylene

Pressure 1 to 30 bar (note the maximum pressures indicated may vary depending on the type of support and its condition.)

Packaging 1000

Colors: Brown ref 01010008 Beige ref 01010010 White ref 01010006

01010008

You might also like